Limited Modified Steering

• Clean up steering parts from the chassis you started with.
• Check drag link, idler arm, tie rod ends for wear (replace if bad).
• Remove tie rod ends from sleeves clean and oil so they adjust freely.
• Clean up and install steering box and steering arm.
• Install front steering parts, drag link, idler arm, tie rod ends
• At this point I would install a dummy engine block, heads, and headers to make sure everything clears
• You need to locate steering wheel and steering shaft mount to fit the driver
• Mount (See quick steer page) quick steer unit and make up shaft steering box u-joint to quick steer sleeve
• Mount shaft (steering wheel to quick steer unit)
• It is very important to not have any shaft bind
• Day Motor Sports has a nice steering kit at a good price.